Front door VEKA Softline 82

Front doors can be glazed with glass units and / or thermal insulation fillers.

Frame thickness: 82 mm
Leaf thickness: 82 mm
Outside walls of PVC profile are 3,0 mm thick. The profile meets the highest quality standards and is rated as Class A. 
The chambers are arranged in 6 rows (in frame – 7 rows).

Min: 1900 mm x 800 mm
Max: 2400 mm x 1000 mm

Opening inside or outside

Coating and colours
Classic design profile.
VEKA Softline 82 profile has a delicate design and superb quality of its surface and colour. The coating requires little maintenance and is very durable.
Shapes
We manufacture PVC front doors of both traditional and unconventional shapes. 
The front doors may have partitions, it can be filled with glass units.

34 (-1;-4) dB (the value may slightly vary for products of different sizes)
Windows from VEKA AG profiles are rated to the highest class of protection against noise.

The construction of the front door ensures excellent heat insulation due to the following features:
Frame thickness
Exclusively thick window frame and leaf from one of the best VEKA AG profiles.
Gaskets
Elastic and durable gaskets arranged in 3 rows, it maximum protect against noise, cold, moisture or heat.
Threshold
Aluminum threshold.

Front doors are supplied with three-pin locks. This ensures the door tightness and security. The front doors hinges characterized by the strength, security and the ability to adjust the pressing and subsidence.

Extremely durable hinges SCHUIT DUISS (Germany)Front door locks FUHR (Germany), KFV (Germany)

PVC Softline 82 profile from VEKA AG are especially firm. 
It is marked as Class A for its strength and durability.
The front door is completely unresponsive to moisture.

A particular strength, impact resistance at low temperatures and durability. It is important to emphasize that the A-class products are manufactured only from virgin raw materials, of recycled material. Therefore, it is more solid and better quality.

All materials used in production of front doors are certified, tested and durable.
Durability of plastic
VEKA AG produces PVC profiles only from unprocessed plastic. This ensures strength and durability of plastic and its resistance to deformations.
The primary difference that makes PVC window profiles from VEKA AG superior is the number of calibration points in the PVC profile manufacturing cycle. The said calibration practice make all VEKA AG products especially stable and resistant to mechanical and thermal impacts in the subsequent stages of manufacturing and ensures that the end product has not altered and is exactly what it was meant to be.
Durability of coating
Both white and coloured VEKA profiles are made exclusively in Germany. It should be noted that the coloured profiles are always produced exclusively in VEKA AG factories in Germany; thus the colour coating is made “in-factory” during manufacturing of the profile itself, which guarantees superb durability of its surface and colour.
Only UV resistant stabilisers are used for profile production, therefore your windows and doors always remain UV resistant and will never fade in sunlight.
Durability of profile structure
The sealing bands are put in place during profile production only after welding of profile corners. For this reason, the sealing is not affected by welding heat along the whole perimeter, including the corners, and remains flexible, functional, and tight.
The seals are not welded, so they can be readily replaced.
Durability of fittings
Windows and doors are durable because of German-made (Danish-made or Swedish-made) fittings that are properly spaced, effectively distribute loads, and maintain their functionality.

Technology of VEKA AG is one of the oldest in PVC window market.
PVC profile with steel reinforcement is a time-tested combination that keeps exclusive strength and effectively retains heat at the same time. Vast experience of VEKA AG demonstrated that the steel reinforcement does not have a significant impact on thermal properties of doors and windows. Products based on this technology measure up to passive house windows.

PVC front doors require minimal maintenance.
Here are the main instructions to remember:
Do not use aggressive surface cleaners for PVC products.
Make sure to protect PVC windows and doors from construction materials, since they can cause irreparable damage if they get on the product surface. Note: Do not use aggressive sticky tapes that may damage the surfaces.
Immediately remove the protective film after installation works have been completed since it can cause surface damage if left in place for a longer period.
Remove dirt and dust from the surfaces several times a year. Use water-damped sponge or cloth. PVC profiles may be cleaned with soapy water or water and soda.
To properly use windows and doors the following factors must be taken into account:
Proper transportation and storage of production
Protection and care of profile surface
Care of glazed units
Maintenance of sealing and drainage openings (especially after construction works – do not leave debris inside)
Maintenance of opening mechanism (especially after construction works – do not leave debris inside, oil the opening mechanism twice per year)
Proper ventilation

PVC front doors with CE mark
PVC front doors meet the requirements of Construction Products Directive (EU). The basis of conformity declaration comes from ift Rosenheim GmbH.
Quality control according to requirements of RAL quality mark for Class A of PVC windows.
Thermal insulation according to DIN 4108 and EnEV, i.e., German energy-saving standards.
Sumeda UAB has implemented management standards ISO 9001, ISO 14001, and ISO 45001.
Sumeda UAB is certified at the Ministry of Environment of the Republic of Lithuanian.

The product is 100% recyclable.

Windows and doors are completely safe to health, since materials used for manufacturing meet the strictest EU norms for health safety, safety of use and environment protection.