Front door VEKA Softline

The front door is glazed with glazing units and/or filled with thermal panels.

Frame thickness: 70 mm
Leaf thickness: 70 mm

Outside walls of PVC profile are 3.0 mm thick. The profile meets the highest quality standards and is rated as Class A.

Steel reinforcement is 1.5 mm thick or more.

Min: 1900 mm x 800 mm
Max: 2400 mm x 1000 mm

The doors are in-swinging and out-swinging.

34 (-1;-4) dB (the value may slightly vary for products of different sizes)

Windows from VEKA AG profiles are rated to the highest class of protection against noise.

Security
Front doors are equipped with three-bolt locks. They ensure tightness and security of the door. Hinges used for the front doors are exceptionally strong and secure and are adjustable for setting and pressure.

Safety to health
All VEKA plastic profiles include only calcium-zinc stabilizers and are lead-free.

The profile features a classic design

VEKA Softline profile features a subtle design and superb quality of its surface and colour. The coating requires little maintenance and is very durable

Shapes
The doors can include partitions, which may be glazed with glazing units.

View the shapes…

Coating and colours
The VEKA Softline profile has a classical design and superb quality of its surface and colour. 

The colours can be selected from a wide range of standard and unconventional colours. The colours range from white to very dark; other possibilities include various colour shades, wood imitations, different colours on inside and outside.

Exceptionally durable hinges SCHUIT DUISS (Germany)
Front door locks FUHR (Germany), KFV (Germany)

PVC windows with CE mark
PVC windows and doors meet the requirements of Construction Products Directive (EU). The basis of conformity declaration comes from ift Rosenheim GmbH.
Quality control according to requirements of RAL quality mark for Class A of PVC windows.
Thermal insulation according to DIN 4108 and EnEV, i.e., German energy-saving standards.

Sumeda UAB has implemented management standards ISO 9001, ISO 14001, and ISO 45001.
Sumeda UAB is certified at the Ministry of Environment of the Republic of Lithuanian.

The product is 100% recyclable.

Windows and doors are completely safe to health, since materials used for manufacturing meet the strictest EU norms for health safety, safety of use and environment protection.

PVC windows from VEKA AG profiles are especially firm. 
They are marked as Class A for its strength and durability.

The profile is reinforced with a square steel tube of 1.5 mm thickness. This reinforcement ensures the maximal possible strength. Walls of PVC profile are thick. These features make the profile exceptionally firm.

1.5 mm thick reinforcement is sufficient according to window quality standards. However, in some cases we use 1.75 mm reinforcement to meet our internal quality standards, for example, in case of coloured products that are more affected by sunlight than white products.

Outside walls of PVC profile are 3.0 mm thick.

It is important to note that only original raw materials and no recycled materials are used for production of Class A products. All these features increase strength and quality of windows and doors.

The opening leaf is reinforced with a double-bent edge to achieve maximal strength.

All materials used in production of windows are certified, tested and durable.

Durability of plastic
VEKA AG produces PVC profiles only from unprocessed plastic. This ensures strength and durability of plastic and its resistance to deformations.

The primary difference that makes PVC window profiles from VEKA AG superior is the number of calibration points in the PVC profile manufacturing cycle. The said calibration practice make all VEKA AG products especially stable and resistant to mechanical and thermal impacts in the subsequent stages of manufacturing and ensures that the end product has not altered and is exactly what it was meant to be.

Durability of coating
Both white and coloured VEKA profiles are made exclusively in factory. It should be noted that the coloured profiles are always produced exclusively in VEKA AG factories; thus the colour coating is made “in-factory” during manufacturing of the profile itself, which guarantees superb durability of its surface and colour.
Only UV resistant stabilisers are used for profile production, therefore your windows and doors always remain UV resistant and will never fade in sunlight.

Durability of profile structure
The sealing bands are put in place during profile production only after welding of profile corners. For this reason, the sealing is not affected by welding heat along the whole perimeter, including the corners, and remains flexible, functional, and tight.
The seals are not welded, so they can be readily replaced.

Technology of VEKA AG is one of the oldest in PVC window market.

PVC profile with steal reinforcement is a time-tested combination that keeps exclusive strength and effectively retains heat at the same time. Vast experience of VEKA AG demonstrated that the steel reinforcement does not have a significant impact on thermal properties of doors and windows. Products based on this technology measure up to passive house windows. 

From the start of PVC window production, we chose VEKA AG as our long-term partner. Over the years VEKA AG has proofed its reliability and high value of its profiles.

VEKA profiles enable us to offer professional PVC window systems. Design and manufacturing phases of your window systems will benefit from manufacturing and installation know-how accumulated by both VEKA AG and us. Our long term partnership with VEKA AG ensures smooth operations and high standards of production – deep knowledge of the profile and excellent quality of products.

PVC windows and doors require minimal maintenance.

Here are the main instructions to remember:

– Do not use aggressive surface cleaners for PVC products.

– Make to sure to protect PVC windows and doors from construction materials, since they can cause irreparable damage if they get on the product surface. Note: Do not use aggressive sticky tapes that may damage the surfaces.

– Immediately remove the protective film after installation works have been completed since it can cause surface damage if left in place for a longer period.

– Remove dirt and dust from the surfaces several times a year. Use water-damped sponge or cloth. PVC profiles may be cleaned with soapy water or water and soda.

To properly use windows and doors the following factors must be taken into account:
– Proper transportation and storage of production
– Protection and care of profile surface
– Care of glazed units
– Maintenance of sealing and drainage openings (especially after construction works – do not leave debris inside)
– Maintenance of opening mechanism (especially after construction works – do not leave debris inside, oil the opening mechanism twice per year)
– Proper ventilation

>>Maintenance schedule